500
| Parameter | Unit |
| Laser power | W |
| Process range (length x width) | mm |
| Cutting thickness | mm |
| Laser wavelength | nm |
| Pulse frequency | HZ |
| Maximum cutting speed | m/min |
| Electrical source | V/HZ/A |
| X, Y, Z axis geometric positioning accuracy | mm/mm |
| X, Y, Z axis re-orientation accuracy | mm |
| Weight | kg |
L2C-0303Y L2C-0404Y L2C-0505Y 500 300x300 6 1064 1-300 0.035 380/50/100 ≤ ± 0.05/1000 ≤ ± 0.04 380 500 400x400 0.16-6 1064 1-300 0.035 380/50/100 ≤ ± 0.08/1000 ≤ ± 0.04 390 500 500x500 6 1064 1-300 0.035 380/50/100 ≤ ± 0.08/1000 ≤ ± 0.04 400
High Precision Ballscrew
Each axis is designed with a large diameter high precision ballscrew, imported from Taiwan, fixed by pre-tensioned ballscrews, to provide high-rigidity and minimize thermal distortion.
Axes Slideways
The axes slideways are mounted with roller type linear guideways imported from Taiwan, to optimize stability of both cutting feed and rapid traverse.
Automatic Focusing Height Follower
The patented automatic focusing height following system can automatically adjust the best focal length. if the metal sheet have wavy surfaces, the focus height follower can ensure constant distance between the focal head and the plane of the metal sheets to be cut, so that consistent cutting quality can be achieved. It can avoid defects caused by wavy metal surfaces and and also avoid the damage of the nozzle head.
Drivers and servo motors
Imported servo system ensures the possibility of realizing extreme precise positioning with the excellent dynamic response acceleration property and closed loop control method and that makes moving positioning mechanism operate smoothly, reliably and free of maintenance.
Working table
The machine is designed with a fixed work table and transversal aluminum strip and has small pneumatic wheel carriers for the metal sheet to slide along the machine body for easy loading.
Cutting head
Magnetic control
Easy to disassemble
Unit-crash protection
Cutting Software
This versatile software can design all kinds of graphics, text, real-time processing, supports CAD, CorelDraw, and graphics formats
Control System
The professional industrial PC with graphical interface, easy operation, professional cutting control software running on WINDOWS. The control system is an ergonomic unit which houses the electric cabinet, NC control and display and PC controller. The cabinet has a air condition as standard.
Coolant system
The machine is equipped with intelligent external water cooling system. This has a low noise operation, high precision control of temperature to ensure a extended life and reliable operation of the machine.
Input data
Cutting parameters are input by a windows keyboard located in a convenient place under the graphic screen.
Germany imported YAG laser generator
The generator consist of:
- YAG crystal rod: lifetime is 15,000 hours (nearly 3years)
- Golden chamber (high qulity Golden Chamber wil be never broken)
- Xenon lamp: lifetime of Xeon Lamp is about 500 hours
This dual xenon-pumped laser is cost effective and easy to maintenance; operators can replace the consumables and maintain the product independently after two days training.
Optical System
When the laser beam come out ,it will be transmitted by reflecting lens, amplifying lens, focusing lens, then it reflects a high intensity laser radiation to the metal surface, finales a constant external light path accomplished.
The imported beam expander lens can shorten the focal depth of the laser ,thus the focused energy is further concentrated to effectively improve the processing speed.
.jpg)
