High Tensile Steel Tube Cutting Line

Together with SOCO’s i2® (Intelligent Interface) control system and Touch Screen, the SA-78NCE offers precision and versatility, while allowing for quick setup times between different tube materials, sizes and lengths.

- Especially suitable for Cutting Automotive parts such as Impact Beams, Chassis and Cross Bar tubing
- High Tensile Tube Cutting (up to 120 kg/cm²)
- High Speed Sawing: the average sawing cycle times can be up to 4.5 seconds for most sizes.
- Automatic separation of first and last cut vs. working pieces
- First and crop cuts down to 25mm
- Quick Saw Blade Change system
- Safety covers for operational safety and minimizing noise levels.
- 1 or 2 optional length stoppers with Digital Length Readout. NC Length Stopper is available in optional.
- 2 Loading Positions available: Left Side and Right Side Loading Magazines
- Electric Servo Controlled Feeding and Cutting
- Unique Blade Holders and Gearbox Brake System for complete backlash elimination

Equipped with a Bundle Loading Magazine and with an Output Gate of 2, 3 or 4.5 meters, the SA-78NCE offers the highest sawing output for High Tensile, Mild Steel and Stainless Steel tubes and pipes

- Capacity up to Ø76 mm tubing. Sawing Lengths up to 2 / 3 / 4.5 m
- First and crop cuts down to 25mm SA-78NCE may be equipped with 2 different saw blades:
- TCT saw blades : High Tensile Materials and other Steels
- HSS saw blades : mild and stainless steel.

Deburring and transportation unit BDB-70 with flat guide way for round tubing

- Length Measuring System with Programmable Interface and Touch Screen
- Length measuring tolerances of +/- 0.01mm.
- Motorized measuring length adjustment.
- Automatic separation against rejected parts
- Automatic Stoppage when rejected parts reach a set quantity Stacking – STK-3000
- Suitable for Round Tubes and Profiles

Stacking STK-3000
- Suitable for round, square tubes and Profiles
- Standard with Safety System for unloading of finished parts without production stoppage