- Simultaneous turning on both spindles can achieve the best cutting condition and increase the machining accuracy and quality of long work pieces.
- With the advanced double-turret and double-spindle construction, one turret can cut a work piece in one spindle with the other running at the same time. One simultaneous turning machine means replacing two machines which increases working efficiency.
Parameter | Unit |
Max turning diameter | mm |
Max turning length | mm |
Max swing diameter | mm |
Chuck size | ″ |
Bar capacity | mm |
Hole through spindle | mm |
Spindle motor | kW |
B-axis rapids | rpm |
OD tool shank size | mm |
ID tool shank size | mm |
GMS-2000ST | GMS-2600ST | ||||||||||||||||||||
|
|
Standard arm type
Standard KM63 arm type 24 station ATC. Index speed : 3 sec ( T-T ) / 7 sec ( C-C )
Main spindle
The main spindle is installed with a built-in spindle motor which eliminates power loss and belt slipping problems. The C-axis with high resolution magnetic encoder provides high precision contour machining capability
Tool system
Tool spindle uses triple plate curvic coupling with worm gear drive structure. Swiveling range : ±120° Indexing resolution : 0.001°
Bed Construction
The bed height is lower than 30° or 45° slant beds which reduces the center of gravity of the machine.
High performance
Large size Ø 250 curvic coupling equipped with main spindle motor driven turret provides the best cutting ability. Tool Square : □ 25 mm ; Tool Round : Ø 40 mm Live Tooling : ER 40
Slide way design
The Z / Zs axes are adopted with high-speed, high-precision roller linear guideway design to increase work piece overall accuracy and maintain excellent cutting rigidity.
Main and sub-spindle module
The main and sub-spindle module are equipped with cylindrical roller bearings which are better than angular contact bearings.
Advanced slide way design |
High precision built in spindle |