152
| Parameter | Unit |
| cutting angle 45° | |
| Working capacity(round tube) | mm |
| Working capacity(square tube) | mm |
| Working capacity(rectangular tube) | mm |
| cutting angle 90° | |
| Working capacity(round tube) | mm |
| Working capacity(square tube) | mm |
| Working capacity(rectangular tube) | mm |
| Mitre cutting | ° |
| Saw blade size | mm |
| Spindle motor | kW |
| Spindle speed | rpm |
| Hydraulic motor | kW |
| Pressured air | kg/cm² |
| Machine weight | kg |
145 127 180x60 152 140 240x80 30 - 90 - 30 ⌀370-⌀450 5.5 35~180 3.7 70 6000
Together with SOCO’s i2 (Intelligent Interface) control system and Touch Screen, the SA-150NC MITRE offers precision and versatility, while allowing for quick setup times between different tube materials, sizes and lengths.
SOCO i2 Controls
• Programmable IPC + Touch Screen with Intuitive graphics
• 80 different type of cutting combinations
• i2 Controls recommends the ideal parameters based on cutting materials and size.
• Data Editing and Storage for over 2 Million Files.
• Remote troubleshooting by Internet and Mobile Phone.
Touch screen graphical interface for machine setup, diagnostics, remote troubleshooting, program management and automatic recommendation of cutting parameters.
Material Nesting System
• Graphical interface for programming cutting shapes and lengths
• 3 different work pieces may be programmed in one stock material
• 3 different cutting angles may be programmed for each material side
• Nesting based on most economical way or by work process sequence
AUTOMATIC SAWING PROCESS
SETTING PARAMETERS
LOADING MATERIALS
FEEDING
STRAIGHT CUTTING
ANGLE CUTTING
WORK PIECE SEPARATION
