High RIGID High Precision Toolroom Lathes
This lathe series was designed for better cutting single workpieces or large batches. The machine rigid construction (bed, spindle, headstock, tailstock, guideways, etc.) and the mobile components, the large speed range for the spindle, as well as the high feed rates allow a rational selection of the cutting parameters and various operations for normal or heavy duty cutting, while maintaining a high level of precision
| Paraméter | Egység |
| ágy szélessége | mm |
| Gépágy fölötti átmérő | mm |
| Ágy fölötti átmérő | mm |
| Főorsóvég | |
| Főorsó fordulata | ford/perc |
| Csúcs közti távolság | mm |
| Főmotor | kW |
| Szegnyereg dugattyú átmérője | mm |
| Szegnyereg dugattyú max. lökete | mm |
| Gépméretek (HxSzxM) | m |
| Géptömeg | kg |
SOLID PT-035-560 355 560 788 D1-8 25-1600 1000 1500 2000 3000 7.5 75 180 3.4x1.1x1.4 2720
A TERMELÉKENYSÉG NÖVELÉSE,
CSS + CVS + DRO CSOMAGGAL SZERELT PROFITURN ESZTERGÁN
A CSS + CVS csomaggal és a tengelyek menti elmozdulást digitálisan kijelző csomaggal szerelt PROFITURN esztergák akár 25%-al nagyobb termelékenységet is elérhetnek a többi hagyományos esztergákhoz képest.
Csak a PROFITURN esztergák biztositanak olyan technikai feltételeket, amelyek lehetővé tesznek olyan forgácsolási teljesitmény elérését, amelyek eddig csak CNC esztergákon voltak elérhetőek. A CSS + CSV csomag automatikusan vezéreli a főorsó fordulatszámát, ezáltal maximálisan kihasználhatóak az egyre performensebb forgácsoló szerszámok képességei.
- Hosszabb szerszám élettartam a forgácsolási sebesség optimizálásával
- 25%-os termelékenység növekedés
- A forgácsoló szerszám képességeinek maximális kihasználása
- Jobb minőségű és pontosságú simitás
This is a general presentation for the entire Profiturn SOLID series . Models may have some minor differences.
The bed, made of high quality Meehanite cast iron, provides toughness and vibration strength. Its design authorizes chips fast removal. It is equipped with a bridge of which dismounting allows increase machining diameter.
The headstock is made of high quality cast iron, heavily ribbed, is designed to absorb vibration even in hardest machining cycles. The rigid, large main spindle runs in high-precision adjustable taper roller bearings. The gearbox offers a wide range of cutting speed plenty of torque allowing machining of various materials. It is designed to have a smooth running with low vibrations and with a closed shape.
The slides are of an extremely rigid construction and the backlashes are adjusted by means of tapered keys. The slides are endowed with rubber wipers avoiding the guideways gripping. The carriage, fixed on the longitudinal slide, provides automatic feeds, rapid feeds and working feeds, as well as, manual feeds in two directions(longitudinal and cross).
The cross slide runs in a dove-tail guideway. Adjustment via pressure plate. Feed automatic or with handwheel. Both the longitudinal and cross slides can be clamped. The upper slide with dove-tail guideway can be pivoted 360°. A feed lever with safety lock prevents longitudinal and axial feed switch-through.
The tailstock, made of top quality, has a rigid construction, vibration absorbing and can easily travel along the bed guideways . A lead screw, driven by hand wheel, allows axial movement of the quill on a 120 mm maximum travel. It can be set eccentrically with max. ±13 mm for cutting.
A centralized lubrication installation provides the gear box and feedbox lubrication.The carriage and the slides are lubricated from a pump fixed inside the carriage.
Use the four-position apron stop for disengaging the apron automatically at up to four different apron locations. You can tighten the eccentrics in place on the rod, each at different rotated positions, so each eccentric corresponds with a number on the dial.
The steady rest serves as a support for long shafts (length to diameter ratio of 3:1 or greater). The steady rest can be placed anywhere along the length of the workpiece.
