Top range "made for Europe", with standard hydraulic crowning
- high speed, high precision, high rigidity
- electro-hydraulic servo system, complete closed-loop control the synchronization of ram
- worktable with automatic hydraulic crowning compensation
- throat deformation compensation mechanism, ensure the bending depth and precision
| Parameter | Unit |
| Bending force | KN |
| Bending length | mm |
| Dist. between side-frames | mm |
| Throat | mm |
| Daylight | mm |
| Stroke | mm |
| Main cylinders | |
| Crowning cylinders | |
| Approach speed | mm/s |
| Bending speed | mm/s |
| Return speed | mm/s |
| Power of main motor | kW |
| Oil quantity | L |
| Backgauge | |
| Reach X | mm |
| Speed X | mm/s |
| Repeatability X | mm |
| Reach R | mm |
| Speed R | mm/s |
| Repeatability R | mm |
| Reach Z | mm |
| Speed Z | mm/s |
| Repeatability Z | mm |
| Overall dimension(LxWxH) | mm |
| Weight | kg |
PBH-630-4100 PBH-630-6200 6300 4100 3200 510 620 365 2 4 120 9 100 45 1200 1000 400 ±0.06 200 200 ±0.05 2900 400 ±0.5 44000x2450x4450 45000 6300 6200 5100 510 620 365 2 6 120 9 100 45 1200 1000 400 ±0.07 200 200 ±0.05 4800 400 ±0.5 6500x2450x5350 63000
Shortened compensation time with high bending accuracy
Two HEIDENHAIN linear scales are installed on press brake which constantly monitors the ram position with micron level accuracy. These scales are mounted on a special bracket which are completely isolated from any deformation caused to the C-frame structure during the ram upstroke/downstroke and the load. In effect, it always gives the precise and actual position of the ram under any condition.
Many other makers of press brakes install the scales directly on the C-frame which results in errors in the real position of the ram.
The working table is composed by 3 parts, among which the middle part is the main working table, and the other two are used for hydraulic crowning throught the lower working table.
The pressure for the hydraulic crowning is set automatically, after the length and thickness of the sheet, to be bent has beeen programmed into the Controller. The triple robust steel plates that are assembled like a "sandwich", work with hydraulic crowning system - ensures an even bending angle across the entire length of the bend.
Delem DA65W (Standard)
- 10.4 inch TFT color LCD display, two dimensional programming
- PLC function
- Internal memory 32MB, extendable to 128MB
- Maximum controllable axes:24
Cybelec ModEva 10 (Optional)
- 2D graphic programming
- Microsoft Windows Based PC control
- 10.4″ - TFT- Color monitor
- Quick set-up and ease of operation
Delem DA66W (Optional)
- 10.4 inch TFT color LCD display, two dimensional programming
- Standard function of Microsoft net work
- PLC function
- Internal memory 32MB, extendable to 128MB
- Maximum controllable axes:24
Delem DA69W (Optional)
- Color display 12 inch TFT
- 2D/3D graphical CNC system
- PLC function
- Automatic bend sequence
- Operator warning system
Standard Accessories
HOERBIGER, Germany hydraulic system (complete set; a full loop electric-hydraulic proportional servo controlled)
ABB main motor (a complete set; pressure valves block, synchronizing valves block, feeding valves block, oil pump)
Worktable is equipped with automatic CNC controlling hydraulic crowning system
Backgauge has two CNC axes (X, R) being moved with ball screw-shaft, guided by linear guide, driven by AC servo motor
Equipped with two finger-stops, which can move on the linear guide
Mechanical fast clamping of upper tool
2-V+T slot quick change die installation on worktable (including one set of European standard tooling)
Two sides door-type safety guard and rear safety guard with rear door
Doors equipped with electric safety switch
Safety covers for inside and outside main cylinder
Safety covers for front and back of hydraulic crowning cylinders
Often-use internal hexagonal key spanner for adjusting tools
Optional Accessories
Various punch and die clamping system [auto-hydraulic, HAWE (Germany) or WILA type]
Various punches and dies according to requirement
Automatic bending-help front sheet support (moving along the linear guide)
Extra finger-stops moving along linear guide
Extra CNC axis X1, X2, R1, R2, Z1, Z2
Hydraulic cooling device system
- water-cooling device
- fan-cooling device
- HYDAC, Germany fan-cooling device (Inc. automatic self-cycling)
- Constant temperature oil-cooling device
Air-conditioner for electric cabinet (700W)
Normal safety guard system
FIESSLER AKAS-LCIIF (inside PLC)
LAZERSAFE LZS003, Australia laser guarding
CE standard safety guards
Hydraulic system with middle-position monitoring function + Fiessler AKAS-IIF (inside PLC)
Hydraulic system with middle-position monitoring function + Fiessler AKAS-LCIIF (inside PLC, laser beam aligning ) + other CE requirement
Hydraulic system with middle-position monitoring function + Pilz safety PLC + Leuze light curtain
