BTA Deep-Hole drilling machines
BTA is the acronym from Boring and Trepanning Association which developed the BTA system. It involves a single drill tube in which high pressure coolant is supplied to the drill through the annular area between the drilled hole and the tube outer diameter. The chips are evacuated through the interior diameter of the tube. Compared to Gun Drill system, BTA allow removing much thicker metal area, obtaining wider diameter holes. The minimum diameter is 10 mm.
| Parameter | Unit |
| The largest inner diameter of the pipe | mm |
| Pipe working length | mm |
| Z axis stroke | mm |
| Workpiece spindle rotation speed | r/min |
| Power of motor | kW |
| Servo motor power | kW |
| Cooling pump flow | L/min |
| Coolant tank system | L |
BTA 2000NC-CR 140 2000 2300 1200 37/45 4 420 5000
Other Machines
BTA-F1 Series
