Offer
Catalogue
Video

HPI Series CNC Turret Punch

- built for maximum flexibility
- upto 1000 punching cycles per minute
- 36 turret stations standard
- keeping-touch index tool position (proprietory technology NISSHINBO, Japan)
- automatic strip-off detector, clamp-sensor
- rapid loading/unloading of tools

details_arrow
Yawei
HPI Series
Yawei HPI-3044 HPI Series CNC Turret Punch
   
  
ParameterUnit
Nominal PresureKN
Max sheet dimensionmm
Carbon steel sheetmm
Stainless steel sheetmm
Max one-time punching diameter
Dies 
Punching Accuracymm
Punching cycles per minutecpm
Max punching frequencycpm
Max sheet speedm/min
Turret speedrpm
Axes of control 
Main powerkW
Air presureMpa
Overall dimension(LxWxH)mm
Weightkg
  • HPI-3044 HPI-3047 HPI-3048
    294
    1250x2500
    6.35
    4
    Ø88.9
    36
    ±0.1
    1000
    595
     
    102
    30
    5(X, Y, Z, T, C)
    21
    0.6
    5600x2300x2200
    14000
    294
    1250x4000
    6.35
    4
    Ø88.9
    36
    ±0.1
    1000
    595
     
    102
    30
    5(X, Y, Z, T, C)
    23
    0.6
    5600x4000x2200
    15000
    294
    1250x5000
    6.35
    4
    Ø88.9
    36
    ±0.1
    1000
    595
     
    102
    30
    5(X, Y, Z, T, C)
    24
    0.6
    5600x5000x2200
    16000
  • HPI-3057 HPI-3058
    294
    1500x4000
    6.35
    4
    Ø88.9
    36
    ±0.1
    1000
    595
     
    102
    30
    5(X, Y, Z, T, C)
    23
    0.6
    6100x4000x2200
    18000
    294
    1500x5000
    6.35
    4
    Ø88.9
    36
    ±0.1
    1000
    595
     
    102
    30
    5(X, Y, Z, T, C)
    24
    0.6
    6100x5000x2200
    19000
VOITH H&L "GREEN" dual pressure ram control units, working with stepped power, two pressure supply system as well a load dependent switching, guarantees up to 58% reduction of energy cost compared to standard hydraulic systems.
Theoretical energy demand during punch operation
One pressure system energy demand during punch operation
Two pressure system energy emand during punch operation
Hydraulic System

Hydraulic System

H+L hydraulic system completely from Germany, with cooling device of oil temperature, low energy consumption and little volume.

Hardened Die Bush

Hardened Die Bush

Turret adopt a sleeve structure, prolonging the service life, the die bush has a higher hardened surface, good antiwearability and easy to change.

CNC  System

CNC System

  • Display 10.4 inch, true colour, multi language
  • CPU: 223 MHZ/400MHZ
  • I/O interface: RS232, 100M Ethernet, USB interface, CF card slot
  • RAM: IG/40G
  • Good expandability

Driving Turret

Driving Turret

Compact structure, high precision of driving, reliable and stable.

Turret & Index Tools

Turret & Index Tools

Thrick turret structure, better guiding and higher precision.
Keeping-touch index tool position, higher precision and efficiency.

Lower Die Rapid Unloading

Lower Die Rapid Unloading

Lower die rapid loading and unloading accurately, rapidly, and conveniently

Standard Accessories

CNC controller is 802DSL from SIEMENS, Germany
Hydraulic system is a complete set of HKL-VT from H+L, Germany
Standard tool station number: 36LA2(B)
Side-positioning device by manual
Equipped with brush worktable
Lubrication system by manual pump
Automatic strip-off detector, clamp-sensor
Lamp for tooling change
Often-use internal hexagonal key spanner for adjusting tools
It has functions of punching, forming, wheel ribbing function etc.

Optional Accessories

CNC controller change to FANUC Oi-PC, Japan
CNCKAD (Israel) Software
RADAN (England) Software
Air-condition for e-cabinet (700W)
Moveable operating station
Equipped with tooling hoisting device by pneumatic cylinder, replace tooling device and table
Equipped with automatic lubricant
Equipped with blow and air mist system
Turret tooling station changed to 26LA2(B)
Turret tooling station changed to 40LA2(D)
Equipped with turret table with station by 38LA2(D)(Inc. one fixed D station)
The location pin automatic up and down by pneumatic cylinder
Extra standard clamp
Full floating clamp
Location pin in the table-middle automatic up and down by pneumatic cylinder
Stainless worktable with steel balls
Leuze light curtain with mirrors around the machine for safety guarding
Extra working table size by 1300*835mm/piece
Mobil hydraulic oil with the machine
Change to HCC hydraulic system,from H+L company,Germany

Other Machines
Yawei HPC Series
HPC Series
Details
Yawei HPH 30 Series
HPH 30 Series
Details
press, pressing, press-punch, CNC TURRET PUNCH PRESSES, CNC Turret Punch, Hydraulic System, Turret & Index Tools, VOITH H&L, energy savings, hpq series, hpc series, hph series,sheet metal,punching,holes, punch force, stamping, blanking, perforating, parting, drawing, notching, lancing and bending, metal bars, square and round bars, various profiles, pipes, ironworkers